I am in the process of creating my first road vehicle, it is a Small CityBus mainly used for routes inside cities, they're cheap to build and maintain but can only go 50km/h. It will hold around 40 people (to be realistic) and will be able to accelerate fairly quickly. It will cost around 7500 to build and will cost around 0.25 to maintain.
I will upload screenshots occasionally.
Soon to come:
Bending Bus
Double Decker
Edit: I have uploaded complete image with and without side turning signals. (citybus sl has side turning signals)
in a way, busses intended for urban lines have little meaning in being faster (well, probably they have it for speed bonus in standard ST). WHat really makes the difference in RL is the acceleration, which helps keeping up the commercial speed, and which can be set with the gear.
Yes, actually if you use speeds greater than 50 Km/h won't have any effect if it's used inside city (the road type won't allow it to run faster). It usually has impact on costs, which should be related to its speed and power/gear, so making it faster would make it more expensive to run.
Btw, the picture looks nice :)
Thank you, it's my first road vehicle. But i don't yet completely understand the gear setting.
From the
Simutrans EN wiki (http://en.wiki.simutrans.com/index.php/Gear):
Now i understand, so what do you think i should put the gear to?
It depends on the power you set for that bus. In my opinion, if the power is high, let's say 200-400 KW, the gear should be between 0.75-0.90, so you can get a realistic aceleration feeling. I'm not a pak128 expert, so Zeno or Vs may tell you more about the best values for that attribute.
IMO we should distinguish short distance busses (less speed, more acceleration) from long distance ones (more speed, less acceleration)
Both of you vilvoh and fabio are true. Initially the gear should be 100, so the power of the vehicle remains unchanged. If it's a city bus, as fabio says, it should have good acceleration and low speed, so with a speed of 50kmh the gear can be a bit highter than 100 (let's say 110, or 115).
But the acceleration will depend on the vehicle weight. So the better way to set it up is first drawing it, and once finished make the pak and test it in the game; then you can tune the gear to reach the desired behaviour.
I have finished the png so i'll make the dat now and release a beta version.
PS: I have uploaded the finished png and a png with the bus having lights on the sides. (The turning signals for drivers beside busses who can't see the front or back of the bus. (View Image)
http://upload.wikimedia.org/wikipedia/commons/thumb/5/52/Winnipeg_Transit_865.jpg/250px-Winnipeg_Transit_865.jpg
The lights are right above the front and back wheels.
Talking about the wheels, you should make them more rounded. Now they seem square, specially in NE and SW views.
I'll get on that.
Edit: I've fixed it, try it now.