Slopes in tunnels

Topic: Slopes in tunnels (Read 47424 times) previous topic - next topic

Slopes in tunnels

February 05, 2009, 07:00:57 pm

Without dwachs' effort to the underground view, this would be useless, since it would be hard to get an overview about the tunnels...

Also a version which includes dwachs' underground view patch is appended (some posts below), could you make executables, wernieman?

[ You have to append something like

Code: [Select]

toolbar[8][15]=general_tool[33],7
toolbar[8][16]=general_tool[34],7

to your menuconf.tab ]

Re: A dream becomes true: Slopes in tunnels!

Reply #1 – February 05, 2009, 07:08:09 pm

I... I can't believe my eyes! Is it true? Or am I dreaming?

Re: A dream becomes true: Slopes in tunnels!

Reply #2 – February 05, 2009, 07:43:36 pm

I work on it ....

Re: A dream becomes true: Slopes in tunnels!

Reply #3 – February 05, 2009, 08:02:54 pm

Admin note:

"A dream becomes true!" is not an useful topic... as punishment, I wil... I will... bah! Forget it! The topic title represents very well the moment as I'm seeing.

Quote from: DirrrtyDirk – on February 05, 2009, 07:08:09 pm

I... I can't believe my eyes! Is it true? Or am I dreaming?

*facepalm*

You are not.

Re: A dream becomes true: Slopes in tunnels!

Reply #4 – February 05, 2009, 08:14:43 pm

I think both patches are broken, slopes patch does not apply on top of latest dwachs underground mode patch I know of, and the underground+slopes patch is missing the new ceiling files (though one can get them from the slopes only patch with little effort :-)).

It certainly works though (at least for a single slope :-)).

Re: A dream becomes true: Slopes in tunnels!

Reply #5 – February 05, 2009, 08:34:23 pm

Quote from: ij – on February 05, 2009, 08:14:43 pm

I think both patches are broken, slopes patch does not apply on top of latest dwachs underground mode patch I know of, and the underground+slopes patch is missing the new ceiling files (though one can get them from the slopes only patch with little effort :-)).

I think the first patch is against a clean simutrans, the second one against simutrans with the new-underground-mode-patch applied. So at least one of the patch files is not broken

@gerw: Nice work!

Saves me programming time

Re: A dream becomes true: Slopes in tunnels!

Reply #6 – February 05, 2009, 08:38:07 pm

Shid .. I don't get it to work!

Code: [Select]

simutrans@birgit ~/comp2 $ ./compilieren.sh
patching file simwerkz.cc
patching file simwerkz.h
patching file simmenu.h
patching file Makefile
patching file boden/tunnel_ceiling.cc
patching file boden/tunnel_ceiling.h
patching file boden/tunnelboden.cc
patching file boden/tunnelboden.h
patching file boden/grund.h
patching file simplan.cc
patching file bauer/wegbauer.cc
patching file bauer/tunnelbauer.cc
patching file bauer/tunnelbauer.h
patching file simmenu.cc
patching file simwerkz.cc
Hunk #2 FAILED at 357.
Hunk #20 FAILED at 1668.
Hunk #21 FAILED at 1693.
Hunk #22 succeeded at 1765 (offset 15 lines).
Hunk #23 succeeded at 1969 (offset 15 lines).
Hunk #24 FAILED at 1989.
Hunk #25 succeeded at 2333 (offset 16 lines).
Hunk #26 succeeded at 2345 (offset 16 lines).
Hunk #27 succeeded at 2511 (offset 16 lines).
Hunk #28 succeeded at 2566 (offset 16 lines).
Hunk #29 succeeded at 2635 (offset 16 lines).
Hunk #30 succeeded at 2730 (offset 16 lines).
Hunk #31 succeeded at 2782 (offset 16 lines).
Hunk #32 succeeded at 2829 (offset 16 lines).
Hunk #33 succeeded at 2845 (offset 16 lines).
Hunk #34 succeeded at 2887 (offset 16 lines).
Hunk #35 succeeded at 2969 (offset 16 lines).
Hunk #36 succeeded at 3066 (offset 16 lines).
Hunk #37 succeeded at 3139 (offset 16 lines).
Hunk #38 succeeded at 3298 (offset 16 lines).
Hunk #39 succeeded at 3351 (offset 16 lines).
Hunk #40 succeeded at 3385 (offset 16 lines).
Hunk #41 succeeded at 3418 (offset 16 lines).
Hunk #42 succeeded at 3467 (offset 16 lines).
Hunk #43 succeeded at 3507 (offset 16 lines).
Hunk #44 succeeded at 3546 (offset 16 lines).
Hunk #45 succeeded at 3682 (offset 16 lines).
Hunk #46 succeeded at 3753 (offset 16 lines).
4 out of 46 hunks FAILED -- saving rejects to file simwerkz.cc.rej
patching file simwerkz.h
Hunk #9 succeeded at 223 with fuzz 2 (offset 11 lines).
Hunk #10 succeeded at 282 (offset 11 lines).
Hunk #11 succeeded at 300 (offset 11 lines).
Hunk #12 succeeded at 316 (offset 11 lines).
Hunk #13 succeeded at 341 (offset 11 lines).
Hunk #14 succeeded at 385 (offset 11 lines).
Hunk #15 succeeded at 454 (offset 11 lines).
Hunk #16 succeeded at 582 (offset 11 lines).
Hunk #17 succeeded at 631 (offset 11 lines).
Hunk #18 succeeded at 689 (offset 11 lines).
Hunk #19 succeeded at 853 (offset 11 lines).
Hunk #20 succeeded at 864 (offset 11 lines).
Hunk #21 succeeded at 875 (offset 11 lines).
Hunk #22 succeeded at 886 (offset 11 lines).
Hunk #23 FAILED at 913.
1 out of 23 hunks FAILED -- saving rejects to file simwerkz.h.rej
patching file simmenu.h
Reversed (or previously applied) patch detected!  Skipping patch.
3 out of 3 hunks ignored -- saving rejects to file simmenu.h.rej
patching file Makefile
Reversed (or previously applied) patch detected!  Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file Makefile.rej
patching file vehicle/simpeople.cc
patching file vehicle/simverkehr.cc
patching file vehicle/simvehikel.cc
patching file gui/colors.cc
patching file gui/components/gui_world_view_t.cc
patching file gui/colors.h
patching file gui/fahrplan_gui.cc
patching file simworld.cc
patching file boden/wege/weg.cc
patching file boden/brueckenboden.cc
patching file boden/tunnelboden.cc
Hunk #1 FAILED at 31.
1 out of 1 hunk FAILED -- saving rejects to file boden/tunnelboden.cc.rej
patching file boden/tunnelboden.h
Reversed (or previously applied) patch detected!  Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file boden/tunnelboden.h.rej
patching file boden/grund.cc
patching file boden/grund.h
Hunk #3 FAILED at 207.
1 out of 6 hunks FAILED -- saving rejects to file boden/grund.h.rej
patching file boden/fundament.cc
patching file boden/boden.cc
patching file boden/monorailboden.cc
patching file simplan.cc
Reversed (or previously applied) patch detected!  Skipping patch.
4 out of 4 hunks ignored -- saving rejects to file simplan.cc.rej
patching file bauer/wegbauer.cc
Reversed (or previously applied) patch detected!  Skipping patch.
4 out of 4 hunks ignored -- saving rejects to file bauer/wegbauer.cc.rej
patching file bauer/tunnelbauer.cc
Reversed (or previously applied) patch detected!  Skipping patch.
9 out of 9 hunks ignored -- saving rejects to file bauer/tunnelbauer.cc.rej
patching file bauer/tunnelbauer.h
Reversed (or previously applied) patch detected!  Skipping patch.
2 out of 2 hunks ignored -- saving rejects to file bauer/tunnelbauer.h.rej
patching file simmenu.cc
Reversed (or previously applied) patch detected!  Skipping patch.
5 out of 5 hunks ignored -- saving rejects to file simmenu.cc.rej
patching file simview.cc

Re: A dream becomes true: Slopes in tunnels!

Reply #7 – February 05, 2009, 09:25:10 pm

Quote from: DirrrtyDirk – on February 05, 2009, 07:08:09 pm

I... I can't believe my eyes! Is it true? Or am I dreaming?

I can't believe it either. It's a mirage for sure...

Re: A dream becomes true: Slopes in tunnels!

Reply #8 – February 05, 2009, 09:34:52 pm

Mirage or miracle?

At last we will get a "full version" of underground mode!

Re: A dream becomes true: Slopes in tunnels!

Reply #9 – February 05, 2009, 11:44:00 pm

Yesterday, I had not much time, so it was a post with nearly zero information

Yes, the first patch-file is only my patch (against 2295) and the second is my patch + dwachs' patch (against 2295), but tunnel_ceiling.* is missing (**** svn add ... happens as often as forgetting mail attachment). I appended a new file.

@ijs: It should also work with many slopes. Even underwater tunnels are possible...

@Igor: Of course, we can rename it.

Re: A dream becomes true: Slopes in tunnels!

Reply #10 – February 05, 2009, 11:55:46 pm

simply...

Re: A dream becomes true: Slopes in tunnels!

Reply #11 – February 06, 2009, 12:49:14 am

This looks quite cool. :-)

Re: A dream becomes true: Slopes in tunnels!

Reply #12 – February 06, 2009, 02:18:01 am

Quote from: VS – on February 05, 2009, 09:34:52 pm

Mirage or miracle? At last we will get a "full version" of underground mode!

I intended mirage, but accept miracle as well.

Re: A dream becomes true: Slopes in tunnels!

Reply #13 – February 06, 2009, 08:37:22 am

So at the moment, I only need the last patch for the compiling?

Re: A dream becomes true: Slopes in tunnels!

Reply #14 – February 06, 2009, 09:01:28 am

Wow. First rivers and now slopes in tunnels. In less than 2 weeks! I will have to start dreaming up more dreams to have included in simutrans soon!

Re: Slopes in tunnels

Reply #15 – February 06, 2009, 09:20:04 am

Quote from: wernieman – on February 06, 2009, 08:37:22 am

So at the moment, I only need the last patch for the compiling?

Yes. Just get a clean r2295 and then apply underground-2295_slopes.patch.

Edit:
With r2300 you will get

Code: [Select]

2 out of 46 hunks FAILED -- saving rejects to file simwerkz.cc.rej

but it doesn't matter, since these two hunks was included in r2298. So you can just compile it with r2300 and ignore the failed hunks.

Re: Slopes in tunnels

Reply #16 – February 06, 2009, 12:08:19 pm

Some problems.
- Ways under sea level can't slope up or slope down anymore.
- With under ground patch, two orange zeigers shows on slope, and one of them never disappear.

Re: Slopes in tunnels

Reply #17 – February 06, 2009, 12:58:37 pm

I compiled it, see http://patches.simutrans-germany.com/

The Name is 2295, but the Simutranscode Revision is 2300

And it is only the Programm, no dll (see nightly-page) or Translation/PAK ...

Re: Slopes in tunnels

Reply #18 – February 06, 2009, 12:59:26 pm

Quote from: z9999 – on February 06, 2009, 12:08:19 pm

- Ways under sea level can't slope up or slope down anymore.

This is because the build_tunnel_slope only works with real 3d coordinates, but you can't select tiles underwater. I think, this is changeable with the new undergroundview.

Quote

- With under ground patch, two orange zeigers shows on slope, and one of them never disappear.

I can't reproduce this. Can you describe, what you have done? Edit: Now I've got it. I will have a look for it, when the underground view is included in trunk.

@wernieman: Thank you!

Re: Slopes in tunnels

Reply #19 – February 06, 2009, 03:26:16 pm

I am very impressed - this is an extremely useful feature!

Re: Slopes in tunnels

Reply #20 – February 06, 2009, 03:31:54 pm

I'm really looking forward to this, too. Erotunnel in 1830, mwahahahaha! Napoleon will steamroll (on a steam train, after all

) all the way to Edinburgh.

Re: Slopes in tunnels

Reply #21 – February 06, 2009, 03:51:42 pm

Excellent work!

Hope this will make into the trunk among the new underground view soon.

Re: Slopes in tunnels

Reply #22 – February 06, 2009, 04:20:51 pm

Another problem.
I can make a slope down on the tile which have stop.
And stop name changed "undef".
( I didn't test this stop is valid or not.)

It need to check stop, depot, etc, and forbid it.

Re: Slopes in tunnels

Reply #23 – February 06, 2009, 08:35:02 pm

@gerw: I wasn't reporting a bug with that "one slope" statement, just saying that I got it to build and work nevertheless, I didn't try more than a slope at that time, thus "one slope"...

...But here's a real issue, one can go into Simu-trans-dimensional with a simple enough trick :-D

Re: Slopes in tunnels

Reply #24 – February 06, 2009, 09:09:30 pm

simply ... MAGNIFICAL ! Surely one of the better progress with rivers !

EDIT : just one thing ... How I must make these slopes

Re: Slopes in tunnels

Reply #25 – February 06, 2009, 09:49:41 pm

gauthier, you need the special .exe file and you need to add the two lines to your simuconf.tab (which will not work with a normal simutrans nightly! prepare to remove them again).

Re: Slopes in tunnels

Reply #26 – February 06, 2009, 10:13:48 pm

I have downloaded the special exe (which has just crashed after creation of four cities connected by a High speed line which has bothered me to connect the central city's station ...)

but what are the lines to add to simuconf ?

Re: Slopes in tunnels

Reply #27 – February 06, 2009, 10:15:47 pm

In the very first post in this thread it says:

Quote from: gerw – on February 05, 2009, 07:00:57 pm

[ You have to append something like
Code: [Select]
toolbar[8][15]=general_tool[33],7
toolbar[8][16]=general_tool[34],7
to your menuconf.tab ]

Re: Slopes in tunnels

Reply #28 – February 07, 2009, 08:27:48 am

Quote from: z9999 – on February 06, 2009, 04:20:51 pm

It need to check stop, depot, etc, and forbid it.

Ok. I will do this

Quote from: ij – on February 06, 2009, 08:35:02 pm

...But here's a real issue, one can go into Simu-trans-dimensional with a simple enough trick :-D

Ups. Lost in space

Edit: Since something similar is already possible, I will only prevent this, if simutrans is compiled with the 'ONLY_TUNNELS_BELOW_GROUND' setting in simconst.he

Re: Slopes in tunnels

Reply #29 – February 07, 2009, 02:23:56 pm

I added the two lines (not easy because of the horizontal presentation of the text ... I don't know why simuconf and menuconf are presented horizontally but in French I say : "c'est chiant !"). But no new toolbar, I looked at every toolbar but nothing new

Re: Slopes in tunnels

Reply #30 – February 07, 2009, 06:33:17 pm

The 2 lines shoud be added to the menuconf.tab, section: specialtools. The 3. colum may be modified to work.

The "up" slope works fine, but the "down" slope shows a marker on the surface

Re: Slopes in tunnels

Reply #31 – February 07, 2009, 06:47:39 pm

Quote from: The Transporter – on February 07, 2009, 06:33:17 pm

The 2 lines shoud be added to the menuconf.tab, section: specialtools. The 3. colum may be modified to work.
...

this is different for paksets

Re: Slopes in tunnels

Reply #32 – February 07, 2009, 06:48:18 pm

Using the underground slope gives extra money, exact +42947272,96 cr

Re: Slopes in tunnels

Reply #33 – February 07, 2009, 07:52:43 pm

this is awesome! congrats!

Re: Slopes in tunnels

Reply #34 – February 07, 2009, 08:41:25 pm

Can someone playing with pak128 send me his menuconf.tab ? It's driving me crazy !