Railway signaling problem

Topic: Railway signaling problem (Read 15106 times) previous topic - next topic

Railway signaling problem

June 12, 2009, 07:10:28 am

How a hell I can solve this:

Seems nothing work right.

Long rail, so I want a 2 or more train, but how they can p****?

Sorry, English is not my first language.

Re: Railway signaling problem

Reply #1 – June 12, 2009, 07:57:58 am

You need no choosing-signal befor a crossing. Stations have a build-in-signal.

You have to make both sides to one-way tracks. The north-track in one direction, the south-track in the other direction.

To build one-way-signals you have to click with the signal-tool on the signal too. 2 or 3 times.

Edit: A choosing signal is to choos a free station. Set it before a station with more than one plattform.

Re: Railway signaling problem

Reply #2 – June 12, 2009, 08:10:53 am

You need exactly two signals, no more. They will convert the two side tracks to one-way.

------+<---------+---------
\--------->/

Build these as normal signals, then click with their builder tool again to change direction. You can cycle through bidirectional, right, left.

A signal in direction > faces the open end of parenthesis (here left side) and allows trains to go only from left to right.

Re: Railway signaling problem

Reply #3 – June 12, 2009, 08:55:10 am

A little too simply.

Test in other place: