Skip to main content
Topic: Trolleybus 64 attempt (Read 7795 times) previous topic - next topic

Trolleybus 64 attempt

I was bit bored today, so I decided to do some pixel art




This is, or at last this was supposed to be, Solaris Trollino 12 (http://de.wikipedia.org/wiki/Solaris_Trollino_12). I used Slow Overheadpower as base for trolley overhead lines. This way, they should work fine with slow overhead used for trams.

http://www.ii.uj.edu.pl/~szklarze/Trolley.zip

doing add-ons to Simutrans sure is hard. Is there alignment helper for cars somewhere?

Re: Trolleybus 64 attempt

Reply #1
you have some pak64 alignment samples at graphics.simutrans.com or at the SVN where you can find the pak64 sources (png and dat files)

Re: Trolleybus 64 attempt

Reply #2
I was able to find rail alignment samples, but no samples for cars. I doubt that they are the same. :(

Re: Trolleybus 64 attempt

Reply #3
You're right, they're not the same. I usually use any png from a road vehicle from the SVN. I erase the content and lthen I leave the shape so I can align the new vehicle over it. Anyway, I've uploaded the vehicle template I usually use, it's at graphics.simutrans.com >> pak64.



Re: Trolleybus 64 attempt

Reply #5
After reading from you,I do know something I have attached could be useful:
http://forum.simutrans.com/index.php?topic=189.0
(That's a CMB Titan. You may enjoy this by pak-ing it with the dat. posted.)

Hope this template works-since trolley buses are running on the roads, not on a rail.
So-you may need a citycar template, not the railcar's.

PS Would anybody made that CMB's Titan a template for all? Thanks in advance.

Re: Trolleybus 64 attempt

Reply #6
Done, I've uploaded it in pak64 templates gallery